A36 Steel: How to Specify the Right Material for Pipe and Fabrication Projects

A36 steel plate, fabricated pipe support, and rolled steel cylinder in a steel workshop

A36 steel is widely used for structural plates, supports, and fabricated components. This guide explains when A36 is suitable, when a pipe-specific standard is required, and what to include in an RFQ. Table of Contents A36 steel is one of the most recognised carbon structural steel specifications in the market. It is often requested for […]

Steel Pipe Pile Properties: From Material Strength to Field Performance

Steel pipe pile properties

Table of Contents Steel pipe pile properties affect structural performance, drivability, durability, and project cost. For buyers, checking the steel grade alone is not enough. Outside diameter, wall thickness, pile length, end condition, soil conditions, corrosion protection, and inspection requirements all matter. More importantly, material strength should not be confused with the actual bearing capacity […]

ASTM A709 Grade 50 Guide: Properties and Purchasing Advice for Pipe Buyers

ASTM A709 Grade 50

This ASTM A709 Grade 50 Guide helps you check material requirements before ordering steel for a bridge or fabricated tubular component. The first question is simple: does your drawing specify the starting plate, the finished product, or both? A matching strength value cannot answer that question. You also need agreed welding, inspection, and documentation requirements. […]

ASTM A135 vs ASTM A53- How to Avoid Pipe Purchasing Mistakes

ASTM A135 vs ASTM A53 comparison ERW steel pipes

ASTM A135 covers ERW pipe, while ASTM A53 includes welded and seamless types. Compare manufacturing, inspection, traceability, and project acceptance before approving a substitution or placing an order. Table of Contents Comparing ASTM A135 vs ASTM A53 usually starts with a purchasing question: can the offered pipe meet your project specification? Matching diameter and wall […]

Solar Tracker Torque Tube: 6 Checks to Match Specifications and Request an Accurate Quote

Illustrative view of a solar tracker torque tube with bearing supports and bolted connections

A solar tracker torque tube needs more than the right outside dimensions. Check drawings, materials, coating, fabrication, inspection and delivery requirements before placing your order. Table of Contents A solar tracker torque tube must fit the tracker design, connection interfaces and inspection requirements. Matching the outside dimensions alone is not enough. For tracker manufacturers and […]

UNIACERO at ROG.e 2026: Connecting With Steel Pipe Buyers in Latin America

UNIACERO booth at ROG.e 2026 in Rio de Janeiro

 UNIACERO connected with Latin American energy professionals to discuss steel pipe purchasing, order coordination and delivery planning. Table of Contents Rio de Janeiro, Brazil — September 2026 Steel pipe purchasing was part of a wider conversation about project supply when UNIACERO met customers and industry professionals at ROG.e 2026 in Rio de Janeiro. Held at […]

Tube China 2026 in Shanghai: UNIACERO Looks at Project Purchasing Priorities

Tube China 2026 in Shanghai: Project Buying | UNIACERO

Table of Contents September 21–24 marks Tube China 2026 in Shanghai, with the international tube and pipe exhibition taking place at the Shanghai New International Expo Centre. Alongside wire China, the event brings tube products, manufacturing equipment and related technologies into one exhibition setting. For importers and project purchasing teams, the commercial work continues after […]

FISCA Visits UNIACERO’s Tianjin Fire Pipe Production Facility

UNIACERO representative introducing the fire pipe production workshop to FISCA members

Table of Contents On September 8, 2026, UNIACERO welcomed a delegation from FISCA to our manufacturing facility in Tianjin. The visit focused on Fire Pipe production, laboratory testing and the quality controls used during manufacturing. The meeting was built around practical project questions. How are customer specifications transferred to the production line? Which points are […]

API 5L X52 LSAW Pipe With 3LPE: 12 Checks for Accurate RFQs

API 5L X52 LSAW Pipe With 3LPE

Specify API 5L X52 LSAW Pipe With 3LPE by separating the base-pipe and coating requirements. Use this guide to check PSL, dimensions, testing, traceability and RFQ documents before ordering. Table of Contents An RFQ stating only API 5L X52 LSAW Pipe With 3LPE leaves too much open to interpretation. The mill cannot accurately price the […]

AS/NZS 1163 C350L0 Steel: What Australian Buyers Should Confirm Before Ordering

AS/NZS 1163 C350L0 SHS and RHS steel hollow sections

Table of Contents If your drawing specifies AS/NZS 1163 C350L0, finding a supplier that can produce the required hollow section is only the first step. For Australian structural steel projects, buyers may also need to confirm the exact section size, wall thickness, impact-test requirements, material traceability, certification scope and inspection documents before placing an order. […]

CONTACT US